Construction Safety Training – The Role of Videos in the Training Session

Good construction safety practices benefit everyone involved. By reducing the numbers of injuries and deaths, they also lower property damage, legal liability, workers’ compensation claims, and time missed from work. A good safety training program helps the employer keep up with safety training requirements of the Occupational Safety and Health Administration (OSHA). If the workplace embraces a safety environment in which every employee helps promote proper safety procedures on the job, then employees both new and experienced will be invested in having a safe work environment. The National Institute for Occupational Safety and Health (NIOSH) concluded after a 1998 study that training in creating and maintaining a comprehensive safety culture at work is proven to help prevent workplace injuries and deaths. Construction related training videos are a great medium for this education.

One of the best ways to emphasize the importance of a safe work culture while satisfying OSHA regulations for safety education is to hold regular safety training in which employees watch safety related videos that specifically spell out the required safety rules and practices. One workplace environment in which safety training is absolutely essential is the construction site. Because of the many hazards of this workplace regular safety training and an on-the-job mindset of the importance of safety are vitally important.

Some of the top violations that OSHA finds in construction sites include the following:

* Inadequate fall protection

* General safe workplace practices

* Aerial lift safety

* Improper use of ladders

* Hazard communication

Safety videos addressing these workplace issues can keep safety violations to an absolute minimum. When an employer gathers workers to watch construction safety videos on a regular basis, the employer can be certain that the workers have been adequately exposed to the training materials, whereas written safety handouts may not be read thoroughly.

In the United States, in just the three-year period between 2003 and 2006 the number of foreign-born Hispanic workers in the construction industry increased by almost one million. The ability of these workers to speak English varies widely, and for that reason, it is important for employers with large numbers of Spanish speaking workers to provide safety training in Spanish as well as English. Training videos in both English and Spanish allow employers to ensure that safety training is understood by and benefits all employees.

Following are some examples of specific video training topics that are essential for a workplace safety environment that adheres to OSHA standards in practices and in training.

1. Slips and Falls. Slips and falls can be very dangerous in the construction workplace, where workers may be working on raised platforms or near earth-moving machinery. The construction worksite is constantly changing, too, on a daily or even more frequent basis. Identification of slip and fall hazards, reporting and correcting hazards, and a constant awareness of slip and fall hazards are extremely important in the construction industry. Training videos that emphasize how costly slips and falls can be are a major step toward eliminating slip or fall accidents.

2. General Safe Work Practices. Safety videos that emphasize the basics such as good housekeeping, proper lifting, and the use of personal protective equipment will remind construction workers of the many and varied hazards that a construction jobsite has. This type of video also reinforces the importance of a general safety culture at work.

3. Aerial Lift Safety. The use of videos on safety when using aerial lifts can help reduce the accidents caused by poor aerial lift safety, one of OSHA’s top construction violations. Videos that cover the proper donning techniques for body harnesses and regular equipment inspection can reinforce the importance of aerial safety lift practices.

4. Ladder Safety. Ladder safety training cannot be overemphasized. Ladders are used by so many workers in so many different applications, that ladder safety training must be a high priority. Workers should be trained in safety requirements, the 4:1 ratio of straight ladders, incorrect ladder procedures and unsafe behavior.

5. Hazard Communication. Chemical hazards on the job must be marked and labeled. Workers must be trained in chemical labeling, safety, and material safety data sheets (MSDS). Video training in hazard communication helps workers avoid some of the most common OSHA standards violations.

Training videos that focus on safety have a prominent place in workplace safety education. Not only do videos present the material in a way that can be easily comprehended, the pictures of proper safety procedures reinforce the lessons of the audio track. For many U.S. construction worksites, training is necessary in Spanish as well as English to ensure that lessons are understood by all workers. Safety education training in both languages are easy and effective training tools in the bilingual workplace.

Construction Industry Training Programs

Everyone likes to be the best and professional in any particular task. Whether we talk of technology or we talk of other related fields. Every course has its real importance and needs good results. Keeping good skills in any field needs good knowledge and perfect hands involvement. So, it is always better to choose the path that best suits your requirement. To gain work in the industry, various people like to begin their work with front end loader training or bulldozer operator training and try for their front end loader ticket or backhoe ticket.

The construction industry involves a wide range of activities like building, construction, repair, etc. This field is based on a set of complex skills, having the knowledge of the equipment is not sufficient, it is necessary to have a good experience of task as well as equipment. There are various institutions, training centers that offer different level of skills and the different kind of techniques that are required in the construction work. There are many good skill centers, which provide professional construction training services to both small and large businesses. They are providing various courses on warehousing, civil construction, road transportation and many more.

Having the proper knowledge of tools and equipment used in construction is essential for everyone who wants to begin to be perfect in this particular field of construction.
Choose different level of courses like civil construction, mining, road transportation, warehousing. Every field has its own importance and place in today’s time. So choosing any above course leads you to the place that suits you the best. Having an expert construction center with practical knowledge and vast experience in any particular field to teach you is as much as better than going through a pile of books, where you hardly understand anything.

It is better to choose a construction industry training program where the trainees have direct experience in the building and construction industry. Not only a trainee should include knowledge on potential hazards, but should also be prepared to face them and tackle them if required. The course should underline the health, safety, and environmental issues involved in your particular field of work. The best and the top-rated training center help you to gain expertise in different but related skills and the same time offers you the chance to embark on your professional journey when you are equipped with sufficient skills and knowledge.

Construction Industry Training

Jobs are back. After a long period of lull and inactivity, companies are back in action to rope in the best candidates to keep the momentum going. But landing on a good paying job is not something that can be obtained without toiling hard. Impressive look, fabulous profile, good educational qualifications and experience would not make any significant or dramatic difference in an interview process. Actually, companies have become a bit finicky or cautious while the recruitment drive is on the way. In order to weed out unproductive candidates, they are now employing different methods and one of them is to hire a candidate with multi tasking abilities. Now, not every candidate has the skills to do multiple tasks at a time and therefore, the only thing they can do to make them employable to the prospective employers is to undergo different professional training courses. Now, there is no tried and tested method nor there is any hard and fast rule to spruce up your CV. One needs to pinpoint his area of expertise as well as his areas of weakness for this purpose. And, when you will be able to do this, you will know what professional course is best for you and what are not.

A fat paycheck at the end of the month is all we desire, but desires may remain unfulfilled and this can lead to frustration. A feeling of stagnation is bound to cross your mind if you feel yourself stack in career plateau. Now there is only one option that can help you to climb on the ladder of career steadily. Enroll your name in a professional training course that you firmly believe can enhance the prospect to certain extent. Be sure to check the contents and other details of a professional training course before making any decision in haste. There is no point of getting trained if you cannot upgrade your skills to the next level.

Construction industry is the worse affected industry during the great financial turmoil. But it has managed to weather this storm successfully, and is now rearing to achieve a new height. Construction industry is now showing a strong positive sign, which is really hard to overlook. As this industry is offering a steady career, people are making a rush to this industry to bag the best offer.

Cost of production in a construction can go up if the projected is not monitored properly. Besides that, different types of nagging problems can crop up in the process that can lead to the cancellation of the entire project. One needs to remain aware of the safety norms, which is of paramount importance in this industry. Now, it is not possible for everyone to have idea on these different issues such as safety issues, design, dispute management, planning etc that are intrinsically related to this industry. Therefore, the only thing they can do is to enroll in any of the professional construction courses to have a better understanding of the nature and prospect of this industry.

Getting a job in rail industry offers a steady growth opportunity, but in order to grab this job, one needs to complete a professional course that will give him a first hand experience of the nature of this job. Different types of rail transport courses are there and one needs to choose the one that he thinks suitable for him as per his education qualification and professional experience. “Controller of Site Safety” is one such course that makes participants aware of the responsibilities and the dangers of working in this industry. Extensive practical exercises are also conducted in this training.

Engineering Supervisor Initial Certificate (NCCA) is one such training program, where participants are taught how to monitor things carefully in a worksite and how to regulate train movement. This training program boosts the confidence of a candidate to certain extent and it often plays a leading role in grabbing a good job. Trackside Safety Program is another popular training program where candidates are informed about railway safety rules.

None but a competent person is eligible to work at height. There are some obvious hazards of working in high altitude, which is why PASMA training is introduced. This training is specifically designed make candidates aware of the dangers of working at high altitude. Different states have different rules and regulations pertained to high altitude work. Therefore, it is imperative for a job seeker to remain aware of these rules before applying for any such position. What is even more important is that employers are giving more importance to professional As not many people out there who have certificates on PASMA, you might not have to face fierce competition in this industry. Hazards, stability, safety rules, component identification, maintenance etc are some of the vital areas of high altitude work that one should give utmost importance.

Fatalities and injuries are quite common in high altitude work. However, the number of such incidents has reduced drastically with the advancement of technology in this sector. IPAF training course is specifically designed to increase awareness of the impacts of poor management in this specific industry. PAL card along with a certificate are conferred to candidates after the successful completion of this training.

Give your CV a boost with a first aid training program. This training program is specifically designed to make people confident about providing first aid in time of urgency. After the completion of this training, you will be able to deal with medical emergencies more efficiently than ever. Besides that, first aid training helps to identify whether a person is qualified or not to deal with these types of complex medical situations. First aid skill now mainly emphasizes practical skills rather than theoretical knowledge. By obtaining a first aid certification from a recognized institution, you will definitely give your employer one more option to hire you.